Figure 3-2. Generator drive belt adjustment.
(2) Bar generator away from engine to obtain
(3) Adjust generator belt (a above).
to in. belt deflection midway between the two
(4) Install belt guard and secure to engine with
two hex screws.
(3) Tighten adjusting link nut.
b. Belt Replacement {fig. 3-2).
3-17. Compressor Drive Belt
(1) Remove two screws securing belt guard to
engine and remove the guard.
a. Adjustment (fig. 3-3).
(1) Remove two screws (1, fig. 3-3) securing com-
(2) Loosen adjusting link nut, remove old belt
pressor drive belt guard (2) and remove the guard.
and install a new one.
3-5
