TM 5-4930-218-14
(5) Disassemble the junction box by removing the
(2) Remove screws (2), nuts (3), lock washers (4),
eight screws (1, fig. 4-16) that secure the cover (2) and
flat washers (5), and receptacle cover (6).
gasket (3) to the junction box (12), Remove the adap-
(3) Remove screws (7 and 12), nut (8), lock washer
ter (4) and bushing (5). Disconnect circuit breaker
(9), flat washers (10), and clamps (11) that secure the
leads and remove circuit breakers (8) by removing
receptacle cable (13) to the trailer. Disconnect and
screws (6) and lock washers (7). Remove screws (9)
remove the cable.
and lock washers (10) that secure the terminal board
(4) Remove the junction box (19) by removing the
(11) to the junction box (12); remove the terminal
four screws (15), nuts (16), lock washers (17), and flat
board.
washers (18).
