WEEKLY AND MONTHLY SERVICES
(For use with DA Form 464)
Note: Operators will assist the unit mechanics in performing the weekly and monthly PM services.
Technical
Service
Inspection
Monthly
Weekly
GENERAL
Before-Operation Services. Check and perform
1
1
1
services listed in da ily before-operation
services.
Lubrication. Inspect the entire machine for in-
2
2
2
........
2
2
Lubricate if necessary. Refer to the current
lubrication order.
Tools and Equipment. Inspect condition of all
3
3
3
tools and equipment assigned to the ma-
chine.
........
3
3
See that all tools and equipment assigned to
the machine are clean, serviceable, and prop-
erly stowed or mounted. See that the tool
box is in good condition and that it closes
and fastens properly.
Fire Extinguisher. Carbon tetrachloride type.
4
4
4
Check for full charge by removing the filler
plug. See that the operating mechanism is
not corroded and that it is securely mounted
Carbon dioxide (CO,) type. Inspect for in-
secure mounting, kinked or damaged hose,
and missing or broken seal. If the seal is
missing or broken, the extinguisher should be
weighted to determine the amount of charge.
The empty and full weights are stamped on
the valve body.
........
4
4
See that any deficiencies noted are corrected or
reported to the proper authority.
Publications. See that a copy of this technical
5
5
5
manual TB 5-5065-1, and current lubrica-
tion order and Standard Form 91 are on the
machine and in serviceable condition.
Appearance. Inspect the general appearance
6
6
6
of the machine, paying special attention to
ings, and condition of paint.
43