Technical
Service
Inspection
Monthly
Weekly
FUEL SYSTEM-Continued
dirt. See that screen is clean. Make sure gasket is in good
condition before replacing bowl. Replace defective pump with
a new or reconditioned one.
Carburetor and Linkage. See if all carburetor mounting and
39
39
39
assembly bolts and screws are in place and secure. Check
flexibility and operation of linkage.
Tighten any loose mounting and assembly bolts and screws.
.............
39
39
Replace worn or damaged linkage connections.
Air Cleaner. Inspect air cleaner for loose connections. Check
41
41
41
condition of filter element.
Service air cleaner as specified in the current lubrication order.
.............
41
41
Fuel Tank, Cap, and Gasket. Inspect frame and mounting of fuel
43
43
43
tank. Check tank, gasket, and connections for leaks.
See that tank is securely mounted, air vent open, and filler cap
.............
43
43
clean and tight fitting. Repair or replace leaky or damaged
gaskets and connections.
Fuel Lines. Check the fuel lines for leaks, loose connections, and
44
44
44
damage.
Repair or replace damaged or collapsed fuel lines. Tighten loose
.............
44
44
connections. Report all uncorrected deficiencies to the
proper authority.
ELECTRICAL SYSTEM
Spark Plugs. Inspect spark plugs for dirty or cracked insulators.
46
46
46
Clean dirt and oil from spark plug insulators. Replace defective
.............
46
46
plugs.
Remove and clean spark plugs and adjust point gap. Proper gap
.............
46
............................
is 0.023 to 0.028 inch. See that plugs and gaskets are in
good condition before they are reinstalled.
46
