(3) Grasp the connection and swing the upper end forward until it clears the air receiver. Then remove the
connection, sleeve (16), packing (17) and gasket (11).
b. Cleaning and Inspection. Blow out the interior of the connection with compressed air, and wipe the exterior with a
cloth dampened in cleaning solvent. Discard and replace the packing and gasket.
c. Installation (fig. 51).
(1) Assemble the packing (17) to the sleeve (16) and insert these parts into the connection (15).
(2) Apply a thin coat of gasket cement to the gasket surface of the connection fitting (10), and carefully position
the gasket (11) on the fitting.
(3) Assemble the connection to the aftercooler intake manifold and swing it up until it meets the connection
fitting (10). Install the four hex head bolts (9) and self-locking nuts (12).
Figure 53. Aftercooler flange mounting view.
122