parts with compressed air. Discard and replace the packing set. Inspect the remaining parts for physical damage
which may impair the operating efficiency of the hose reel and replace, if necessary.
d. Reassembly (fig. 50).
(1) Assemble the packing (6) and retainer fitting (5) to the slip fitting (7) and insert this assembled group into the
recess in the hose reel shaft hub. Install the four fillister head screws (2) and lockwashers (3), tightening the
screws evenly until the retainer fitting is firm. Do not overtighten these screws.
(2) Secure the support (15) to the lock pin (17) with the taper pin (16). Slide the spring (14) over the end of
Figure 50. Exploded view of hose reel.
117