TM9-4310-396-13
MAINTENANCE OF AIR STRAINER ASSEMBLY
3-5 SERVICE STRAINER ASSEMBLY.
This task covers:
a. Inspection c. Service
b. Removal
d. Installation
INITIAL SETUP
Tools
Equipment Conditions:
None
Engine stopped, para. 2-6.8
Materials/Parts
Rag, Wiping (Appendix E, item 3).
a. Inspection. Refer to PMCS Table 2-3.
b. Removal.
(1) Release latch clips (1, Figure 3-3) on strainer body (2) from compressor intake.
(2) Remove filter element (3) from strainer body (2).
c. Service.
(1) Clean and wipe dry inside of strainer body (2).
NOTE
To replace filter element, notify Unit maintenance.
(2) Gently wipe clean filter element (3).
d. Installation.
(1) Install filter element (3) into strainer body (2).
(2) Install strainer body (2) to compressor intake.
(3) Install latch clips (1) on strainer body (2).
3-11
