TM9-4310-396-13
WARNING
Do not allow compressor/trailer to swing while suspended from a lifting device.
Unload on a level surface. Failure to observe this warning may result in severe
personal injury or death.
WARNING
Keep trailer bed and ramps clean of clay, oil, and all materials which can become
slippery. Failure to observe this warning may result in severe personal injury.
CAUTION
Use care in handling to avoid damage to compressor. If an overhead lifting device
must be used, use appropriate sling so that weight of compressor/trailer is balanced.
Use extreme care when unloading.
CAUTION
If ramps are used, use ramps of adequate size and strength, low angle, and proper
height to avoid damage to compressor/trailer.
c. Use a forklift or other suitable lifting equipment to move compressor/trailer from the transportation vehicle.
4-7 RECEIVING INSPECTION.
4-7.1 Compressor Receiving Inspection. Perform receiving inspection in the following manner:
a. Inspect the equipment for damage incurred during shipment. If the equipment has been damaged, report
damage on DD Form 6, Packaging Improvement Report and any freight damage forms as applicable.
b. Check the equipment against the packing slip to see if the shipment is complete. Report all discrepancies
in accordance with the instructions of DA PAM 738-750.
c. Check to see whether the equipment has been modified in any manner.
4-8 PREPARATION FOR OPERATION.
a. The procedure for operation will consist of understanding the compressor functions and equipment
characteristics. Follow Chapter 1, Section II and Section III.
b. Before operating, be thoroughly familiar with Chapter 2.
c. Change any preservative oil and fuels according to all lubrication instructions contained within
LO9-43 10-396-12.
4-4