TM 9-4310-397-14
4-53. PNEUMATIC SERVICE VALVE HOSE REPLACEMENT.
This task covers:
a.
Removal
b.
Installation
INITIAL SETUP
Tools:
Equipment Conditions:
General Mechanics Tool Kit
Battery cables disconnected from batteries.
Item 1, Section III, Appendix B
(See para 4-49.)
Compressor oil drained. (See para 4-6, d, (2).)
a.
Removal.
(1)
Disconnect hose lines (Figure 4-51, 1) and (2) and remove.
(2)
Remove hose elbows (3), (4), (5), and tee (6).
Figure 4-51. Pneumatic Service Valve Hoses
b. Installation.
(1)
Wrap antiseize tape (item 1, section II, appendix E) on threaded end of elbows (3), (4), and (5).
(2)
Install tee (6), and elbows (3), (4), and (5).
(3)
Install hoses (1) and (2).
(4)
Refill compressor oil per paragraph 4-6, d, (2).
(5)
Connect battery cables to batteries per paragraph 4-49.
4-135
