TM 9-4310-397-14
Figure 4-70. Speed Control Linkage
(2)
Remove nuts (5), (6), and block stop (7).
(3)
Remove pin (8) and arm (9).
(4)
Remove nut (10), ball joint (11), nut (12), and rod (13).
c.
Installation.
(1)
Install rod (13), nut (12), ball joint (11), and nut (10).
(2)
Install arm (9), pin (8), block stop (7), and nut (5).
(3)
Install hex screw (1), new lock washer (2) (item 15, appendix H), bracket (3), and spring (4).
(4)
Install four hex nuts (6) and tighten after adjustment to linkage per paragraph 4-41 a., have been
performed.
(5)
Close control panel and curbside doors.
4-165