TM 9-4310-397-14
4-66. STARTER TESTING AND REPLACEMENT.
This task covers:
a.
Removal
b.
Testing
c.
Installation
INITIAL SETUP
Tools:
Equipment Conditions:
General Mechanics Tool Kit
Roadside doors open.
Item 1, Section III, Appendix B
Battery cables disconnected from batteries.
(See para 4-49.)
Dipstick removed. (See para 4-67.)
a.
Removal.
NOTE
Mounting and terminal hardware is supplied with component and cannot be purchased
separately. Retain all hardware if original component is to be installed. If component is being
replaced, use new hardware supplied.
(1)
Tag (item 18, section II, appendix E) wire leads (Figure 4-73, 3).
(2)
Remove hex nut (1), lock washer (2), two battery cable wires (3), and lead wire (4).
(3)
Push plastic cover (5) forward and remove nut (6), lock washer (7), and lead wire (8).
Figure 4-73. Starter
4-170