TM 9-4310-397-14
(4)
Remove three hex nuts (2). Tag (item 18, section II, appendix E) and disconnect wire leads (3).
(5)
Remove nut (4), lock washer (5), lead (6), two flat washers (7), and hex head screw (8). Discard lock
washer.
(6)
Remove hex head screw (9), nut (10), lock washer (11), flat washers (12) and (13), alternator (14), and belt
(15). Discard lock washer.
NOTE
Disassemble the following only if replacement is required.
(7)
Remove hex head screw (16) and flat washer (17).
(8)
Remove hex head screw (18), flat washer (19), bracket (20), and bushing (21).
(9)
Remove two each hex head screws (22), lock washers (23), flat washers (24), and bracket (25). Discard
lock washers.
(10)
Remove lock nut (26), hex washer head bolt (27), and clamp (28) that secure fuel line (29) to shield (30).
Discard lock nut.
(11)
Remove hex head screw (31), lock washer (32), and strap (33). Discard lock washer.
c.
Installation.
(1)
Mount strap (33) on engine using hex head screw (31) and new lock washer (32) (item 68, appendix H).
(2)
Attach fuel line (29) to shield (30) with hex washer head bolt (27), new lock nut (26) (item 3, appendix H),
and clamp (28).
(3)
Mount bracket (25) to engine using two hex head screws (22), new lock washers (23) (item 68, appendix
H), and flat washers (24).
(4)
Mount bracket (20) to engine using bushings (21), flat washers (17) and (19), and hex head screws (16)
and (17).
(5)
Move alternator (14) and belt (15) into place and insert screw (8) thru shield (30), bracket (20), flat washer
(7), alternator (14), flat washer (7), and bracket (25).
(6)
Place lead (6) on end of screw (17) and secure with new lock washer (5) (item 69, appendix H), and hex
nut (4).
(7)
Insert screw (9) through alternator (14), shield (30), washer (13), and strap (33). Secure with flat washer
(12), new lock washer (11) (item 69, appendix H), and nut (10).
(8)
Install lead wires (3) using tags and wiring diagram (Figure 4-3) and nuts (2). Remove tags.
(9)
Install connector lead (1).
(10)
Connect battery cables to batteries per paragraph 4-49.
(11)
Adjust belts. (See step a. above.)
(12)
Close roadside doors.
4-169
