TM 9-4310-397-14
Table 2-1. Preventive Maintenance Checks and Services for 16MS125
Location
Item No.
Interval
Procedure
Not Fully Mission Capable If:
Item to
Check/Service
EXTERIOR
1
Before
ENGINE OIL
Inspect ENGINE OIL PRESSURE
PRESSURE Gauge
(gauge 1).
Cover lens damaged to
a. Check for cracked or damaged
interfere with accurate
cover lens.
reading.
Crack in case, or class III
b. Check for cracks in case or
leak found.
leaks.
CAUTION
Operating the PRIMING PUMP
when either ambient
temperature is below 100° F
(38° C) ( or more than one time
during a starting cycle will
inject excessive fuel into the
engine and can cause
equipment damage.
2
Before
PRIMING PUMP
Inspect PRIMING PUMP (2)
Control
control.
a. Check for visible damage.
Damage that would
interfere with pump
operation.
b. Check for leaks.
Class III leak found.
2-8
