TM 9-4310-397-14
4-6. INSTALLATION INSTRUCTIONS/PREPARATION FOR USE. -Continued
(e) Clean the engine (2) drain with a wiping rag (item 2, section II, appendix E) and install the drain plug
(3).
(f)
Close curbside access doors (1).
Figure 4-5. Engine Oil Draining
(2) Fill.
(a)
Open roadside access doors (Figure 4-6, 1).
(b)
Remove oil fill cap (2).
(c)
Install 9 quarts of lubricating oil (item 3, section II, appendix E) if engine is being operated at
temperatures above 40° F or (item 4, section II, appendix E) if operated at temperatures below 40°
F.
(d)
Install oil fill cap (2).
(e)
Close roadside access doors (1).
d.
Check Compressor Oil. Drain. and Fill. The compressor is shipped with the proper quantity of lubricating oil for
operation but should be checked prior to operation. The lubricating oil supplied is intended for use at operating,
temperatures above 40° F. If operating temperatures are below 40° F, the lubricating oil must be drained and
filled with appropriate lubricating oil.
4-6
