TM 1-1500-204-23-10
4-6. INSTALLATION INSTRUCTIONS/PREPARATION FOR USE. - Continued
Figure 4-7. Compressor Oil Checking, Draining, and Filling
(f)
Close drain valve (6) and remove pipe.
(g)
Wrap antiseize tape (item 1, section II, appendix E) around the drain valve plug (5) threads.
(h)
Clean the drain valve (6) with a wiping rag (item 2, section II, appendix E) and install the drain valve
plug (5).
(i)
Install approximately 20 quarts of lubricating oil (item 4, section II, appendix E) or until oil is visible in
elbow (2).
(j)
Check condition of preformed packing (3). If cut or damaged in any way, replace it.
(k)
Clean the adapter (4) with a wiping rag (item 2, section II, appendix E) and install oil filler cap (1).
4-8
