TM 9-4310-397-14
Table 4-1. Preventive Maintenance Checks and Services for 16MS125 - Continued
Location
Item No.
Interval
Procedure
Not Fully Mission Capable If:
Item to
Check/Service
2
Quarterly
Engine,
a. Open access doors (1).
Fuel Injection Pump
b. Inspect fuel injection pump (7)
Injection pump damaged
for any visible damage or leaks.
or class III leak is found.
c. Close access doors (1).
3
Quarterly
Engine,
a. Open access doors (1).
Thermostat
b. Inspect thermostat housing (8)
Thermostat damaged or
for any visible damage or leaks.
class III leak is found.
c. Close access doors (1).
4
Quarterly
Engine,
a. Open access doors (1).
Rocker Arm Cover
b. Inspect valve cover (9) for any
Valve cover damage that
visible damage or leaks.
would interfere with
rocker arm operation or
class III leak is found.
c. Close access doors (1).
5
Quarterly
Front,
Service compressor by checking
Compressor
lubricating oil as follows:
a. Remove oil filler cap (10) and
Lubricating oil is not
check oil level in pipe. Proper
visible in elbow.
quantity is indicated by
lubricating oil level being visible
in elbow (11).
b. Check condition of preformed
Preformed packing
packing (12).
damaged.
c. Clean the adapter (13) with a
wiping rag (item 2, section II,
appendix E) and install oil filler
cap (10).
4-13
