TM 9-4310-397-14
Table 4-1. Preventive Maintenance Checks and Services for 16MS125 - Continued
Location
Item No.
Interval
Procedure
Not Fully Mission Capable If:
Item to
Check/Service
6-
e.
Swap batteries (20) being
Cont
careful to place them with
positive and negative
terminals properly oriented
per battery connection
illustration.
f.
Install battery hold down (19)
and hex nut (18).
g.
Carefully connect battery
cables(17) using tags and
connection illustration.
Connect the positive terminal
connections first, then the
negative terminal connections.
Remove tags.
h.
Install box cover (16) and clip
latches (15) onto box cover.
i.
Close access doors (14).
7
Quarterly
Engine Intake,
Service engine air cleaner as
Engine Air Cleaner
follows:
a.
Open access doors (21).
b.
Remove wing nut (22), flat
washer (23), banjo fitting (24),
air cleaner lid (25), and filter
(26).
c.
Inspect filter (26) for any
Filter damaged or
visible damage or restriction
restricted.
such as dirt accumulation.
d.
Clean or replace filter (26)
e.
Install filter (26), air cleaner lid
(25), banjo fitting (24), flat
washer (23), and wing nut (22).
Be sure larger end of banjo
fitting is toward air cleaner lid.
f.
Close access doors (21).
4-15
