TM 9-4310-397-14
Table 4-1. Preventive Maintenance Checks and Services for 16MS125 - Continued
Location
Item No.
Interval
Procedure
Not Fully Mission Capable If:
Item to
Check/Service
(25)
Clean the drain valve (35)
with a wiping rag (item 2,
section II, appendix E) and
install the drain valve plug
(34).
(26)
Install approximately 20
Oil level not visible in
quarts lubricating oil (item
filler pipe elbow.
4,section II, appendix E),
or until oil is visible in
elbow.
(27)
Check condition of
Preformed packing
preformed packing (36).
damaged.
(28)
Clean the adapter (37)
with a wiping rag (item 2,
section II, appendix E)
and install oil filler cap
(33).
d. Clean any spills with a wiping
rag (item 2, section II,
appendix E).
e.
Install new compressor oil
filter(32) (item 2, section IV,
chapter 4).
f.
Close access doors (31)
11
At First
Engine,
Service engine oil filter by
100
Engine oil Filter
replacing it as follows:
Service
Hours
(Initial
a.
Open access doors (44).
Break-in)
b.
Carefully remove and discard
engine oil filter (45).
c.
Clean any oil spills with a
wiping rag (item 2, section II,
appendix E).
d.
Install new engine oil filter (45)
(item 8, section IV chapter 4).
e.
Close access doors (44).
4-22
