TM 9-4310-397-14
Table 4-1. Preventive Maintenance Checks and Services for 16MS125 - Continued
Location
Item No.
Interval
Procedure
Not Fully Mission Capable If:
Item to
Check/Service
12 -
b.
Carefully remove and discard
Cont
engine oil filter (47).
c.
Clean any oil spills with a
wiping rag (item 2, section II,
appendix E).
d.
Install new engine oil filter (47)
(item 8, section IV, chapter 4).
e.
Close access doors (46).
13
250
Engine,
Service belt by checking for proper
Service
Belt
tension and adjusting if necessary.
Hours
a.
Open access doors (48).
b.
Check belt for cracks, tears, or
Belt is cut, cracked, or
glazed appearance.
glazed appearance.
c.
Check belt tension using
Tension indicated is
tension gauge (49) or tension
above or below readings
gauge (50)with a straight edge
A listed.
(51).tension of 85-94 LB
(378-423 N)should be
indicated.
4-24
