TM 5-4220-233-14
4-54. COMPOSITE LIGHT AND LAMPS.
This Task Covers:
a. Replacement
b. Removal
c. Installation
INITIAL SETUP:
Tools
Materials/Parts Appendix D
Screwdriver, Flat Tip
None
Wrench, 9/16"
Equipment Conditions
None
WARNING
SHOCK HAZARD. Prior to working on electrical system ensure intervehicular
cable Is not connected. Failure to follow this warning may result In serious injury.
a. Lamp Replacement.
Figure 4-46. Replace Composite Lights and Lamps.
(1) Loosen six screws (1) and remove lens (2) from light housing (3).
(2) Remove suspect lamp(s) by pushing in on lamp (4) and turning counterclockwise to release from socket.
4-89
