TM 5-4220-233-14
4-55. MARKER LIGHT AND LAMP.
This Task Covers:
a. Replacement
b. Removal
c. Installation
INITIAL SETUP:
Tools
Materials/Parts Appendix D
Screwdriver, Cross Tip
None
Screwdriver, Flat Tip
Wrench, 1/4"
Equipment Conditions
None
WARNING
SHOCK HAZARD. Prior to working on electrical system ensure intervehicular
cable is not connected. Failure to follow this warning may result in serious
injury.
a. Lamp Replacement.
Figure 4-47. Replace Marker Lights and Lamps.
(1)
Loosen two screws (1) and remove lens (2) from light housing (3).
(2)
Remove lamp (4) by pushing In on lamp and turning counterclockwise to release from socket.
(3)
Install new lamp (4) by pushing in on lamp and turning clockwise to engage socket.
4-91