TM 5-4310-227-15
15 Washer, flat, 3/8 in. (2 rqr)
1 Release valve cap
16 Spring
2 Spring
17 Spring sleeve
3 Bearing ball
18 Weight (2 rqr)
4 Release valve body
19 Valve plunger
5 Release valve gasket
20 Cover gasket, 1/32 in. thk
6 Plunger sleeve
21 Housing cover
7 Baffle plate
22 Muffler
8 Unloader body
23 Screen
9 Body gasket (as rqr)
24 Packing
10 Spindle washer
25 Screw, machine, 10-32 X 3/8 in. (6 rqr)
11 Screw, cap, hex-hd, 3/8-16 X 1 in. (4 rqr)
26 Bumper spring (2 rqr)
12 Spindle
27 Lockwire (2 rqr)
13 Washer, lock 7/16 in.
28 Weight pin (2 rqr)
14 Screw, cap, hex-hd, 7/16-20 X 1 1/4 in.
( 1 3 ) Remove the baffle plate (7) from
(12) to the crankshaft. remove the
the unloader body (8).
spindle and spindle washer (10).
b. Cleaning Inspection, and Repair.
(12) Remove the four screws (11) that se-
(1) C l e a n all parts with an approved
cure the unloader body (8) to the
cleaning solvent and dry thoroughly.
crankcase (21, fig. 3-30 ) and remove
(2) Inspect all parts for cracks, breaks,
the unloader body and body gaskets
worn threads, and other damage. Re-
(9, fig. 3-31). Discard the body gas-
place a damaged part.
kets.
3-66
