TM 5-4310-227-15
(2) Inspect all parts for cracks, breaks,
(4) Inspect all other parts for worn or
worn threads, rust, or other damage.
broken threads, leaks, cracks, or oth-
Replace a damaged part.
er damage. Replace a damaged part.
c. Installation.
c. Installation.
(1) Install the nipple and pipe tee (26)
(1) Install the bushing in the globe valve
in the air receiver tank.
and install tine globe valve on the nip-
(2) Install the pipe nipple (27) in the
ple.
check valve (28) and install the as-
(2) Install the hose assembly on the bush-
sembled check valve on the pipe nip-
ing and install the tire gage on the
ple (27) in the pipe tee (26).
hose assembly.
(3) Install the aftercooler manifold (para
a. Removal (Model OEG-458-ENG-1).
(1) Remove the engine (para 3-61).
a. Removal.
(2) Remove the compressor (para 3-62).
(1) Stop the engine (para 2-26).
(3) Remove the receiver tank safety valve
(2) Release all air from the air receiver
tank by opening the draincock.
(4) Remove the pressure gage (para 3-
(3) Remove the receiver tank safety valve
(7, fig. 1-2) from the air receiver
(5) Remove the hose assembly and globe
tank.
valve (para 3-87).
b. Cleaning and Inspection.
(6) Remove the check valve and fittings
(1) Clean all parts with an approved
cleaning solvent and dry thoroughly.
(7) Remove the draincock (4, fig. 1-4).
(2) Inspect for cracks, breaks, rust, or
b. Removal (Models BMW-452-ENG and
damaged threads. Replace a damaged
BMW-452-ENG-1.
valve.
(1) Remove the receiver tank safety valve
c. Installation. Install the receiver tank safe-
ty valve (7, fig. 1-2) in the air receiver tank.
(2) Remove the hose assembly and globe
valve (para 3-87).
and Globe Valve
(3) Remove the fuel tank (para 3-35).
(4) Disconnect the air receiver tank to
a. Removal.
air pressure gage tube and air com-
(1) Stop the engine (para 2-27).
pressor-to-air receiver tank tube from
(2) Release all air from the air receiver
the air receiver tank (21, fig. 2-6).
tank by opening the draincock.
(3) Remove the tire gage from the hose
(5) R e m o v e the elbows, adapters, and
assembly and remove the hose assem-
draincock from the air receiver tank
bly from the bushing.
(6) Remove the screws, lockwashers, and
(4) Remove the globe valve from the pipe
nuts that secure the air receiver tank
nipple and remove the bushing from
to the base channel assembly (1, fig.
the globe valve.
b. Cleaning and Inspection.
c. Cleaning, Inspection, Testing and Repair.
(1) Clean with a clean, dry cloth.
(1) Clean the interior and exterior of the
(2) Inspect the hose assembly for cracks,
tank with steam or an approved clean-
breaks, cuts, or damaged fittings. Re-
ing solvent and dry thoroughly.
place if defective.
(2) Inspect the tank for cracks, broken
(3) Inspect the tire gage for breaks, de-
weld, dents, and corrosion. Inspect
fective fittings, or other damage. Re-
for damaged threads.
place if defective.
