OPERATOR AND ORGANIZATIONAL MAINTENANCE INSTRUCTIONS
Section I. OPERATOR AND ORGANIZATIONAL MAINTENANCE TOOLS AND EQUIPMENT
for the air compressor are listed in the Basic Issue
29. Special Tools and Equipment
No special tools or equipment are required by the
operator or organizational maintenance personnel
31. Organizational Maintenance
Repair
--
for the maintenance of the air compressor.
Parts
30. Basic Issue
Tools and
Equipment
Organizational Maintenance repair parts are
Tools and repair parts issued with or authorized
LUBRICATION
Section II.
b. Cleaning. Keep all external parts not requiring
32. General Lubrication Information
lubrication clean of lubricants. Before lubricating
a. This section contains a reproduction of the
the equipment, wipe all lubrication points free of
lubrication order and lubrication instructions which
dirt and grease. Clean all lubrication points after
are supplemental to, and not specifically covered in
lubricating to prevent accumulation of foreign
the lubrication order.
matter.
b. The lubrication order shown in
figure 8 is an
exact reproduction of the approved lubrication order
c. Points of Lubrication. Service the lubrication
for the air compressor. For the current lubrication
points at proper intervals as illustrated in figure 8.
order, refer to DA PAM 310-4.
d. Engine. Refer to TM 5-2805-208-14 for de-
33. Detailed Lubrication Information
tailed engine lubrication.
tainers and store in a clean, dry place away from ex-
to figure 9 and service the air intake muffler by dis-
ternal heat. Allow no dust, dirt, or other foreign
assembling in numerical sequence and washing the
material to mix with the lubricants. Keep all lubri-
cation equipment clean and ready for use.
elements in soapy water.