TM 5-4310-275-14
WARNING
WARNING
Dry cleaning solvent, Fed. Spec. P-D-680
Dry cleaning solvent, Fed. Spec. P-D-680
or P-S-661, used to clean parts is
or P-S-661, used to clean parts is
potentially dangerous to personnel and
potentially dangerous to personnel and
property. Avoid repeated and prolonged
property. Avoid repeated and prolonged
skin contact. Do not use near open flame
skin contact. Do not use near open flame
or excessive heat. Flash point of solvent
or excessive heat. Flash point of solvent
is 100" F. (386 C.) -- 138 F. (59C.).
is 100" F. (38C.) -- 138 F. (59C.).
b. Cleaning and Inspection.
b. Cleaning and Inspection.
(1) Clean all parts with dry cleaning solvent,
(1) Clean all parts with dry cleaning solvent,
Fed. Spec. P-D-680.
Fed. Spec. P-D-680.
(2) Clean the interior of the fuel lines with
(2) Inspect the fuel tank for dents and leaks.
(3) Check the fuel strainer for damage.
compressed air.
(3) Inspect the fuel line fittings for cracks
(4) Replace all damaged or defective parts.,
and damaged threads.
the fuel tank in reverse sequence of removal.
(4) Inspect the fuel lines for cracks and
kinks.
4-20. Exhaust Pipe Removal and Installation
(5) Replace damaged or defective parts as
necessary.
the fuel line assemblies in reverse sequence of
removal.
4-19. Fuel Tank
Removal and
Installation
the fuel tank.