TM 5-4310-275-14
b. Cleaning and Inspection.
skin contact. Do not use near open flame
(1) Clean all parts with dry cleaning solvent,
or excessive heat. Flash point of solvnet
Fed. Spec. P-D-680.
is 100 F. (38 C.) --138 F. (59 C.).
(2) Inspect for bent or broken pivot pins and
b. Cleaning and Inspection.
(1) Clean the support stand with dry
elongated pivot holes.
cleaning solvent, Fed. Spec. P-D-680.
(3) Inspect for bent or cracked towbar.
(2) Inspect for cracked or worn parts.
the towing attachment in reverse of removal.
the support stand in reverse of removal.
4-37. Support Stand Removal and Installation
4-38. Housing Sections Removal and
Installation
the support stand.
a. Removal.
WARNING
(1) Remove the towing attachment (para 4-
36).
Dry cleaning solvnet, Fed. Spec. P-D-680
(2) Refer to Figure 4-11 and remove the
or P-S-661, used to clean parts is
potentially dangerous to personnel and
panel assemblies.
property. Avoid repeated and prolonged