TM 5-4310-275-14
(2) Inspect for damaged lenses, cracked
WARNING
casings, and damaged threads.
Dry cleaning solvent, Fed. Spec. P-D-680
(3) Replace any defective part.
or P-S-661, used to clean parts is
c. Installation.
potentially dangerous to personnel and
property. Avoid repeated and prolonged
(1) Refer to Figure 4-8 and install the
component in reverse of removal.
skin contact. Do not use near open flame
(2) Connect the air line to the component.
or excessive heat. Flash point of solvent
is 100 F. (38 C.) --138 F. (59 C.).
4-34. Air Lines and Fittings Removal and In-
b. Cleaning and Inspection.
stallation
(1) Clean exterior surfaces with a cloth
a. Removal. Refer to Figure 4-9 and remove
dampened with dry cleaning solvent, Fed. Spec.
the assemblies.
P-D-680.
