Section X. BODY AND FRAME

TM 5-4310-275-14

WARNING

b. Cleaning and Inspection.

Dry cleaning solvent, Fed. Spec. P-D-680

(1) Clean the lines and fittings with dry

or P-S-661, used to clean parts is

cleaning solvent, Fed. Spec. P-D-680.

potentially dangerous to personnel and

(2) Inspect for cracks, kinks, and damaged

property. Avoid repeated and prolonged

threads.

skin contact. Do not use near open flame

c. Installation. Refer to Figure 4-9 and install

or excessive heat. Flash point of solvent

the air lines and fittings.

is 100 F. (38 C.) --138 F. (59 C.).

Section X. BODY AND FRAME

4-35. General

assembly in a level position and also actuates the

parking brake.

Three housing sections are attached to the frame

assembly to provide a protective covering for the

4-36. Towing Attachment Removal and In-

air compressor and engine. The towing at-

stallation

tachment, at the front of the unit, pivots ver-

a. Removal. Refer to Figure 4-10 and remove

tically to allow the unit to be towed by various

the towing attachment.

vehicles. A support stand attached to the front

end of the frame provides a means to maintain the