TM 5-4310-276-14
(8) Service the engine crankcas.
(7) Install belt guard.
Section IX. MAINTENANCE OF FUEL SYSTEM
4-19. Fuel Line Assembly.
the fuel tank into a suitable container.
a.Removal
(1) Remove drain plug (1, fig. 4-19) and drain
peated and prolonged skin contact.
(2) Disconnect the fuel line (2) at the fuel fil-
Do not use near open flame or exces-
tar and remove elbow (3), nut (4), screw (5), lock-
sive heat. Flash point of solvent is
washer (6), clamp (7), elbow (8) and nut (9).
100F (38C).
b. Cleaning and Inspection.
(1) Clean the fuel line by blowing compressed
Drycleaning advent, P-D-680 used to
air through the line. If the line contains a gummy
clean parts is potentially dangerous to
deposit soak the line in cleaning solvent, item 5,
personnel and property. Avoid re-
App. D, and dry thoroughly.
