TM 5-4310-276-14
(2) Remove the unloader valve (3) from the
(1) Clean unloader asessembly with cleaning
air receiver tank.
solvent, item 5, App. D, and dray thoroughly.
c. Cleaning and Inspection.
(2) Examine mounting threads for defective
threads or cracks.
(3) Replace defective unloader.
Drycleaning solvent, P-D680, used to
d. Installation.
clean parts is potentially dangerous to
(1) Install the unloader valve (3) in the air re-
personnel and property. Avoid re-
ceiver tank (1).
peated and prolonged skin contact.
(2) Close drain valve (2).
Do not use near open flame or exces-
sive heat. Flash point of solvent is
4-36. Safety and Relief Valve.
100F (38C).
a. Removal.
(1) Release air from the air receiver tank (1,
