Figure 6-12. Cylinder Head, Disassembly and Reassembly

(2) Remove seven screws, disconnect ignition

(8) Remove intake manifold (para. 6-8).

switch leads, and remove flywheel fan cover.

(9) Remove exhaust manifold-muffler (para.

(3) Remove rocker arm cover mounting screw

and remove the cover.

(10) Loosen connector nut at either end of the

(4) Remove and discard gasket.

breather line and' remove line.

(5) Remove the relief valve.

(11) Remove four nuts and washers and re-

(6) Using figure 4-8 as guide, loosen the con-

move cylinder head.

nector nut on each end of the cable and remove the

b. Disassembly.

cable.

(1) Remove screw (1, figure 6-12), packing (2),

(7) Remove the spark plug from the cylinder

rod assembly (3), and housing (4).

head.

Figure 6-12. Cylinder Head, Disassembly and Reassembly

6-13

Privacy Statement
Press Release
Contact