TM 5-4310-276-14
CRANKSHAFT ASSEMBLY
Section IX.
(3) Extract mounting bolts and remove en-
gine, placing it in a suitable work area.
The crankshaft is operated by the action of the
(4) Remove the cylinder head assembly (para.
piston and connecting rod. It drives the compressor
6-11).
by means of a pulley on the exterior extension of the
crankshaft.
(6) Remove the
piston and
connecting rod
as-
6-21. Crankshaft Assembly
(7) Remove the
bearing cap assembly (para. 6-
a. Removal and Dimuraernbly.
(1) Remove the V-belt guard and V-belts.
(2) Drain
crankcase oil into suitable contain-
ing cone (2).
er.
(10) Remove bearing cone (5) and bearing cup
(9) Remove key (3) and extract crankshaft (4)
(6).
from engine.
(11) Remove crankshaft rear oil seal.
b. Cleaning, Inspection, and Repair.