TM 5-4310-277-14
(2) Install V-belts and belt guard. Connect
b. Cleaning and Inspection. Clean the engine
fuel line to engine and slowdown tube to throttle
with dry compressed air and inspect for damage.
controls. Service the air compressor in accordance
c. Installation.
with daily preventive maintenance services.
(1) Install engine as illustrated in figure 4-30.
Section XV.
MAINTENANCE OF ENGINE (MODEL HGR5-8M-1
AND HGR5-8M-6)
4-40. General
from the air receiver and compressor by opening
draincock.
On Model HGR5-8M-1 and HGR5-8M-6 air com-
(2) Disconnect fuel line connection at the en-
pressor, the gasoline engine and compressor are at-
gine after first draining the fuel tank.
tached to a platform on top of the air receiver. The
(3) Disconnect slowdown tube connection at
platform is welded to the air receiver tank.
the pneumatic cylinder mounted on the engine.
4-41. Engine
(4) Remove belt guard and V-belts.
(5) Remove gasoline engine as illustrated in
a. Removal.
figure 4-31, and 4-31.1 depending on model
(1) Stop the air compressor, and release all air
compressor.
