TM
5-4310-350-14
4-10. General
4-13. V-Belts
The electric motor can be removed from the
a. Removal.
air receiver tank as a unit after removal of the
(1) Remove V-belt drive guard, figure 45.
V-belt guard, belts, conduit, and mounting
(2) Remove the V-belts as instructed on
brackets. The air compressor assembly can be
removed as a unit after the V-belt guard, belts
b. Installation.
and aftercooler tube are removed.
(1) Install V-belts as instructed on figure
4-11. Electric Motor
(2) Install V-belt drive guard.
a. Remoual. Remove the electric motor as
instructed on figure 44.
4-14. Release Valve Assembly
b. Installation. Install the electric motor as
Replacement
instructed on figure 44.
a. Removal and Disassembly. Refer to figure
4-12. Compressor Assembly
assembly as shown.
as instructed in figure 44.
b. Cleaning, Inspection and Repair.
(1) Clean all parts and wipe dry with a lint
as instructed in figure 44.
free cloth.
