TM
5-4310-350-14
c. Replace defective or damaged components in
(2) Check the spring (2) for disfiguration,
reverse order of their removal.
or loss of tension. Replace a defective spring.
(3) Check ball (3), body (4), plunger sleeve
(6) and plunger (7) for excessive wear, burred
threads and general condition. Replace damaged
or defective parts as necessary.
(4) Replace deteriorated gaskets.
c. Reassembly and Installation.
(1) Refer to figure 4-6 and reverse the dis-
assembly and removal procedures.
4-15. Air Intake Muffler
a. Removal. Refer to figure 45 and remove
air intake muffler as shown.
b. Cleaning. Refer to paragraph 39.
c. Installation.
Reverse removal procedure
shown in figure 45.
4-16. Air Receiver Repair
a. Refer to figure 47 and remove the defective
components in numerical sequence,
b. The check valve (9) can be disassembled for
Figure 46. Compressor release valve
cleaning, refer to figure 48.
assembly, removal and installation.
