TM 5-4310-354-14
4-55. Receiver Pressure Gauge.
4-56. Compressor Oil Temperature Gauge.
a. Removal. Remove the receiver pressure gauge
a. Removal.
Remove the compressor
oil
as shown in B, figure 4-34.
temperature gauge as shown in C, figure 4-34.
WARNING
WARNING
Dry cleaning solvent, P-D-680, used
Dry cleaning solvent, P-D-680, used
to
clean
parts
is
potentially
to
clean
parts
is
potentially
dangerous
to
personnel
and
dangerous
to
personnel
and
property.
Avoid repeated and
property.
Avoid repeated and
prolonged skin contact. Do not use
prolonged skin contact. Do not use
near open flame or excessive heat.
near open flame or excessive heat.
Flash point of solvent is 100 F-130 F
Flash point of solvent is 100 F-138 F
(38 C-59 C).
(38 C-59 C).
b. Cleaning and Inspection.
b. Cleaning and Inspection.
(1) Clean the receiver pressure gauge with a
(1) Wipe the gauge, cable, and sensing bulb
cloth dampened with solvent, Federal
with a cloth dampened with solvent,
Specification P-D-680, Type II.
Dry
Federal Specification P-D-680, Type II.
thoroughly.
Dry thoroughly.
(2) Inspect the gauge face glass for any
(2) Inspect the gauge face glass for any
damage. Inspect the case for cracks,
damage. Inspect the case for cracks,
distortion, and damaged threads.
distortion, or any other damage.
(3) Inspect attaching hardware for distortion,
(3) Inspect the sensing bulb and cable for
damaged threads, or any other defect.
kinks, breaks, distortion of bulb, damaged
threads, or any other defect.
c. Installation. Install receiver pressure gauge as
shown in B, figure 4-34.
(4) Inspect mounting hardware for distortion,
damaged threads, and any other damage.
c. Installation.
Install the compressor
oil
temperature gauge as shown in C, figure 4-34.
4-66
