TM 5-4310-354-14
(5) Install a new cover gasket (21), cover plate (20),
and four screws (19). Stake the screws (19)
securely.
(6) Reassemble gasket (17), inlet pipe (16), lock
washers (15) and cap screws (14, 13). Install a
new gasket (12) and attach pump assembly to
engine with three lock washers (11) and cap
screws (10).
(7) Reassemble hose nipple (9), place hose clamps
(7, 6) on bypass tube (8), install the bypass tube
(8) and tighten clamps (7, 6).
(8) Reassemble V-belt (5), fan spacer (4), fan (3),
and attach fan with four lock washers (2) and
cap screws (1).
e. Installation.
(1) Install the water pump (figure 4-29).
(2) Install the radiator and oil cooler group (figure
TS 5-4310-354-14/7-34
(3) Service the radiator (figure 3-6).
Figure 7-34. Water pump impeller, installation.
(4) Adjust the drive belt (figure 4-5).
(4) Support the pump on the impeller end of the
shaft and press the fan pulley (18, figure 7-33)
onto the shaft.
7-36
