TM 5-4310-362-14
TASK SUMMARY
No.
Task
Ref.
Remarks
1
Disconnect main power
2
Disconnect external wiring
3
Remove motor
4
Remove capacitor and case
Disassemble motor only far
enough to isolate a problem.
5
Remove end bells
6
Remove rotor and shaft assembly
7
Remove bearings
8
Remove centrifugal switch
9
Clean, inspect and repair
10
Test
11
Install bearings
12
Install centrifugal switch
13
Install shaft and rotor assembly
14
Install end bells
15
Install capacitor
16
Install motor on air tank
17
Connect wiring to motor
9-5
