TM 5-4310-362-14
ELECTRIC MOTOR (cont)
LOCATION/ITEM
ACTION
REMARKS
14. Thru bolts (6)
Install and tighten.
15. Capacitor (2)
a. Connect to stator leads.
b. Slide into case (1)
16. Capacitor case (1)
Mount on frame.
9-10. INSTALLATION
1. Motor (1)
Position on base (2) with shaft
into the belt guard (3)
Motor must be free to move until belts
2. 4 mounting screws (4),
Install, but do not tighten.
have been installed.
washers, lockwashers
and nuts
Install on shaft.
3. Pulley (5)
Install over pulley and fly-
4. 2 belts (6)
wheel (7).
Adjust tension by moving mo-
5. Belts (6)
tor so belts can be pushed down
1/2 inch halfway between
pulley and flywheel.
6. Mounting screws (4)
Tighten
9-14
