TM 5-4310-368-14
Section VI. MAINTENANCE INSTRUCTIONS
This task covers:
a. Removal
b. Installation
INITIAL SETUP
Applicable Configurations
All
a. Removal
(1) Loosen and remove muffler clamp. Remove exhaust extension pipe.
(2) Loosen and remove muffler clamp. Disconnect exhaust pipe.
(3) Loosen and remove two screws and nuts.
(4) Remove muffler.
b. Installation
(1) Position muffler into muffler supports. Align inlet pipe with hole in roof.
(2) Install and secure one screw and nut into each muffler support.
NOTE
Muffler inlet must be centered in hole in roof.
(3) Attach exhaust pipe to muffler inlet pipe.
(4) Install and secure muffler clamp.
(5) Install exhaust extension pipe.
NOTE
Pipe must point straight up.
(6) Install and secure muffler clamp.
4-11
