TM-5-4310-368-14
4-15.
ROOF PANEL
This task covers:
a. Removal
b. Repair
c.
Installation
INITIAL SETUP
Applicable Configuration
All
Equipment Condition
Paragraph
Condition Description
Muffler Removed
Inlet Air Cleaner Removed
a. Removal
(1) Remove two screws and nuts from each of two cooling air discharge doors. Remove two doors.
(2) Remove 22 screws and nuts from around edge of roof panel. Remove roof panel.
b. Repair
(1) Repair damaged roof panel as required.
(2) Repaint roof panel with proper paint.
c.
Installation
(1) Position roof panel over enclosure. Align roof panel with enclosure and install roof panel.
(2) Install 22 screws and nuts. Secure screws and nuts.
(3) Position cooling air discharge door over each end of enclosure.
(4) Install two screws and nuts into each door. Secure screws and nuts.
4-14
