TM 5-4310-368-14
5-17.
This task covers:
a. Removal
b. Installation
INITIAL SETUP
Applicable Configurations
All
a. Removal
(1)
Disconnect tube nut at top and bottom of oil filter tube assembly.
(2)
Remove oil filter tube assembly.
b. Installation
(1)
Use oil filter tube assembly as a pattern, and bend oil filter tube to fit compressor.
(2)
Cut ends of tube as required. De-burr cuts.
(3)
Install new 6 mm tube nut and ferrule onto each end of oil filter tube.
(4)
Loose assemble oil filter tube and fittings to compressor.
(5)
Hand tighten each tube nut.
(6)
Tighten each tube nut 1-1/4 turns.
NOTE
The 1-1/4 turns are an exact measurement, not an estimate.
(7)
Start engine and compressor and check for oil leaks.
5-33
