TM 5-4310-368-14
5-18.
CONDENSATE DRAIN/UNLOADER VALVE (Figure 5-26 and 5-27)
This task covers:
a. Removal
b. Installation
INITIAL SETUP
Applicable Configurations
All
General Safety Precautions
WARNING
Before removal of valve, make sure all air pressure has been relieved from entire system.
a. Removal
(1) Disconnect seven tubes from valve body fittings.
(2) Remove two bolts, nuts and lock washers.
(3) Remove condensate drain valve assembly.
b. Installation
(1) Position condensate drain valve assembly against bracket on frame.
(2) Align bolt holes in valve with bolt holes in frame bracket.
(3) Install and secure valve to frame with two bolts, lock washers and nuts.
(4) Attach and secure seven tubes to proper fittings in condensate drain valve.
5-19.
DEYHYDRATOR ASSEMBLY (Figure 5-26 and 5-28)
This task covers:
a. Removal
d. Inspection
b. Disassembly
e. Reassembly
c.
Cleaning
f.
Installation
5-35
