Figure 5-6. Reed Valve Head

TM 5-4310-369-14

Figure 5-6. Reed Valve Head

Figure 5-7. High Pressure Head

(5) Lift off head (20), valve plate (23) and valve

(6) Install filter rain caps.

plate gasket (22).

(7) Attach intercooler tube (7).

(6) Remove cylinder head gasket (26).

Cylinder Head (High Pressure)

5-10.

WARNING

a. Removal. (Figure 5-5)

(1) Remove intercooler tube (7).

Drycleaning solvent, P-D-680, used to clean parts

(2) Remove compressor discharge hose from high

is potentially dangerous to personnel and property.

pressure head (15).

Avoid repeated and prolonged skin contact. Do

(3) Remove interstage safety valve (59).

not use near open flame or excessive heat. Flash

(4) Remove intake valve assembly (60) (figure 5-7).

point of solvent is 100F (38C).

(5) Remove exhaust valve assembly (9) (figure 5-7).

c. Installation.

(6) Remove cylinder head bolts (16).

(1) Install new cylinder head gasket (26).

(7) Remove cylinder head (15).

(2) Install valve plate (23).

(8) Remove cylinder head gasket (17).

(3) Install new valve plate gasket (22).

(4) Install cylinder heads (20).

(5) Install air falters (18, 19) and retainer.

5-6