TM 5-4310-373-14
4-23. BELT GUARD ASSEMBLY REMOVAL/REPAIR - continued
Inspect for thread damage.
1. Rivnuts (1)
Replace if necessary by:
2. Rivnuts (1)
a. Drill out.
b. Place new rivnuts in posi-
tion.
c. Install by compressing with
rivnut tool.
a. Inspect for cracked welds.
3. Brackets (2)
b. Weld if necessary.
a. Inspect for fit and align-
4. Cover (3) housing (4)
ment.
b. Straighten if necessary to
ensure correct fit and align-
ment.
Figure 4-40. Belt guard assembly
4-34