TM 5-4310-373-14
This task covers:
The removal of the motor drive pulley.
INITIAL SETUP
Equipment Condition:
Tools:
Compressor unit OFF
Main power OFF
Materials/Parts:
As required
Personnel Required:
Approximate Time Required (minutes):
1 Mechanic
15
REMARKS
ACTION
LOCATION/lTEM
1. Main power
Disconnect.
See para
2. Belt guard cover
Remove.
Remove.
3. V-belts
See para
Remove.
4. Capscrews (1)
Thread into jacking holes (2).
5. Capscrews (1)
6. Capscrews (1)
Tighten evenly until bushing
(3) comes out of pulley (4).
Figure 4-48. Drive pulley assembly
7. Bushing (3)
Lay aside.
Remove.
8. Pulley (4)
Figure 4-49. Drive pulley removal
4-39
