TM 5-4310-373-14
This task covers:
Removal and repair of the belt guard assembly.
INITIAL SETUP
Tools:
Equipment Condition:
Compressor unit OFF
Main power OFF
Materials/Parts:
As required
Personnel Required:
Approximate Time Required (minutes):
1 Mechanic
30
LOCATION/lTEM
ACTION
REMARKS
1. Main power
Disconnect.
2. Screws on belt guard
Remove.
cover (1)
Remove.
3. Belt guard cover (2)
Figure 4-38. Belt guard cover
Loosen 4 bolts.
See para
4. Electric motor mounting
bolts
Remove.
See para
5. V-belts (1)
Remove.
See para
6. Drive pulley (2)
Remove.
See para
7. Flywheel (3)
Remove.
8. Bolts, nuts, washers (4)
Remove.
9. Manifold capscrew (5)
10. Belt guard housing (6)
Remove.
Figure 4-39. Belt guard assembly removal
4-33
