TM 5-4310-373-14
This task covers:
The installation of the compressor assembly.
INITIAL SETUP
Equipment Condition:
Tools:
Main power OF F
Compressor drive disassembled
Materials/Parts:
As Required
Approximate Time Required (minutes):
Personnel Required:
60
1 Mechanic
REMARKS
ACTION
LOCATION/lTEM
Place into position on base.
1.
Compressor (1)
Attach to base with bolts,
Compressor (1)
2.
washers, Iockwashers and
nuts (2). Tighten.
Install.
Intercooler (3)
3.
Install.
Aftercooler (4)
4.
Install.
Flywheel (5)
5.
Install.
V-belts (6)
6.
Figure 4-56. Compressor assembly installation
NOTE
Compressor should turn freely.
Turn compressor over by hand
to insure proper alignment.
See para
Install.
Belt guard cover
7.
Close.
Drain cock at bottom of
8.
tank
Connect.
Main power
9.
Figure 4-57. Drive system
4-44
