TM 5-4310-373-14
This task covers:
The installation of the drive pulley.
INITIAL SETUP
Equipment Condition:
Tools:
Compressor unit OFF
Main power OFF
Materials/Parts:
As required
Personnel Required:
Approximate Time Required (minutes):
15
1 Mechanic
REMARKS
ACTION
LOCATION/lTEM
Place into position over motor
1. Drive pulley (1)
shaft.
Align unthreaded holes in
2. Bushing (2)
bushing (2) to threaded holes
in pulley (1).
Press into pulley (1) only far
3. Bushing (2)
enough for capscrews (3) to
thread.
4. Capscrews (3)
Thread into pulley (1).
Tighten evenly until bushing
5. Capscrews (3)
Figure 4-50. Drive pulley installation
(2) is seated and pulley (1) is
secure.
Figure 4-51. Drive pulley assembly
4-40
