TM 5-4310-373-14
5-1. COMPRESSOR/DISASSEMBLY
This task covers:
The disassembly of the compressor.
INITIAL SETUP
Equipment Condition:
Tools:
Compressor removed and on workbench
Materials/Parts:
As required
Approximate Time Required (minutes):
Personnel Required:
60
1 Mechanic
REMARKS
ACTION
LOCATION/lTEM
See para 3-2.
1. Compressor
Drain oil.
2. Compressor
Remove from unit
See para 4-31.
See para 4-35.
Remove.
3. Intake and exhaust valves
4. Capscrews (1)
See Figure 5-1.
Remove.
CAUTION
Pistons and connecting rods
may be damaged by hitting
crankcase when cylinder is
removed. Support pistons
when removing cylinder.
Remove by twisting slightly
5. Cylinder (2)
back and forth while pulling
upward.
Used gaskets do not seal.
Discard.
6. Gasket (3)
5-3
